move almost all app to sdcard.no root


This procedure was originally written in 2010 for Android 2.2. Since then Android went through 3 major releases and this trick does not work anymore on some devices. Specifically, several people in the comments stated that it does not work on Samsung Galaxy S3 with Android 4.x.
Before proceeding with this hack, I recommend first to check out the comments section and see if other users with the same device and Android version were able to complete it.
[/Update]
One of the most anticipated additions to Android 2.2 (aka Froyo) was ability to install applications to SD card, because it helps to free internal memory. When internal phone memory gets full, Android users have two problems: 1) users can’t install any more apps and 2) phone starts working slowly. The slow down is caused by the lower speed of write operations to the internal memory (see this post for more information on this topic), but the bottom line is that having low available space in the internal memory is not desirable.
So what should a user do when Android phone is running out of internal memory? Uninstalling rarely used apps is an obvious and easiest solution. Moving apps that support Froyo’s apps2sd feature to SD card is another option. However, for this feature to work developers need to enable this option in their apps and unfortunately many large apps still do not support apps2sd.
It turns out there is a hack that lets you move almost any Android app to SD card, even if the app developer did not enable this option. And the best part: obtaining root is not required for this to work. More about this hack below, but first let’s take look at the limitations of the Android apps2sd feature.

Apps2sd limitations

Apps2sd functionality is a step in the right direction. However, the way it is implemented creates some restrictions which you should know about:
  • When an app is moved to SD card, portion of an app still remains in the internal phone memory. On average, you can expect that application’s footprint in the phone memory will be reduced by a factor of 2. Note that for some apps the move will save less than 50%, e.g. Google Earth size in the internal memory reduces from 20.5 MB to 15MB, Adobe Flash Player 10.1 reduces from 12.4 MB to 8 MB.
  • If you use a widget on your home screen from an app, this app should not be moved to SD card because the widget will stop working.
  • Android OS doesn’t have any batch tools to move all movable apps to SD card at once. You will need to manually move one app at a time by going through the list of installed apps in Settings->Applications->Manage Applications. This means 2 taps per app and can be a tedious process.
  • System apps such as Maps and Youtube cannot be moved to SD card using stock firmware on unrooted phone. On some phones Adobe Flash Player is pre-installed as a system app and also cannot be moved. Providers may also install bloatware as system apps, which also cannot be moved on unrooted phone. However, on a rooted phone system apps can be deleted or moved – see FAQ below.
  • If you re-flash phone’s firmware, some backup applications may not restore your apps to SD card, but will restore them to the phone memory.
Despite these restrictions, moving apps to SD card is a good way to free up internal phone memory and speed up your Android phone.

Moving (almost) all Android apps to SD card

To run commands which will enable Move to SD card button for most installed apps, you need to have adb executable on your computer. Adb stands for Android Debug Bridge and is used for Android software development, but it is a very useful tool to have for any advanced Android user. You do not need to have a rooted phone to run adb commands.
  1. To download the latest version of Android SDK (which includes adb executable), follow instructions from step 2 in the Installing the SDK article from the official Android development site. Note: you do not need to install any other software such as Eclipse for this procedure.
  2. After downloading the archive of the SDK, unzip it to any folder and remember its location (let’s call this folder <sdk>).
  3. If you are installing Android SDK on Windows machine, you also need to install USB driver as described in USB driver for Windows section.
  4. Connect the phone using USB cable and do not enable USB storage mode. Go to Settings -> Applications -> Development and enable USB debugging.
  5. Start terminal window on your computer (on Windows: click Start, type “cmd” and press Enter).
  6. In the terminal window, navigate to folder containing file named “adb” (<sdk>\platform-tools folder) using this command: cd “full-path-to-sdk-platform-tools” (replace “full-path-to-sdk-platform-tools” with an actual path as shown in the screenshot below).
  7. Type the following lines in the terminal window and press Enter after each line:
    • adb devices
      • This checks that the phone is connected and is in the correct mode. You should see one entry in the list of the attached devices. If you get “device not found” error, see Troubleshooting section below.
    • adb shell
      • If you get “cannot find file” error and are using Mac or Linux, instead type: ./adb shell
    • pm set-install-location 2 
      • (If this command doesn’t work try using the “old” command: pm setInstallLocation 2. Thanks to polosco for the tip.)
    • exit
    • Now on your phone go to Settings->Applications->Manage Applications.
      • If you have Android 2.3 or later, click on USB Storage tab (may be called SD card). This tab shows a list of apps that either can be installed to SD card or are already on SD card. The ones that have checkbox on the right side are already moved to SD card (credit to Michael Scully for the tip).
      • On Android 2.2 and earlier if you don’s see USB Storage or SD Card tab, click on All tab.
      • Press hardware Menu button and select Sort by Size.
      • Tap on each app that is taking significant amount of space and tap Move to SD card button. Press hardware Back button and repeat.
      • (optional) To change the default installation location for new apps back to the internal phone memory,  go back to your terminal window and type:
        • pm setInstallLocation 0
      • (important) Go to Settings -> Applications -> Development and disable USB debugging. Leaving USB debugging enabled makes your phone vulnerable (e.g. lock pattern can be reset).
      • Enjoy!

    • Troubleshooting

      • “Device not found” error in step 7. Make sure that the phone is connected and is in the USB debugging mode (step 4). On Windows, this error can also mean the driver is not installed properly. Double check that you followed USB driver for Windows steps. If you still are getting this error, try installing a driver for your manufacturer from this link:  Tether “ADB” Driver Installation for Windows.
      • “Permission denied” error: make sure that you correctly typed commands.

      FAQ

      • Q: Does my phone need to be rooted for this hack to work?
        • A: No.
      • Q: Do I need to setup a full development environment (Java, Eclipse) for this to work?
        • A: No.
      • Q: Can I move systems apps such as Maps, Youtube, Adobe Flash Player to SD card?
        • A: On unrooted phone using stock firmware, no.
      • Q: I don’t have time for this hack. How can I check which of my installed apps officially support moving to SD card?
        • Install “App 2 SD” application from Android Market and it will list applications for which developers enabled apps2sd support.
      • Q: Can I move all apps to SD card in one operation?
        • A: Using stock firmware, no. If you know a way to do so, please let me know in the comments.
      • Q: Can I delete bloatware apps installed as “system apps” by the carriers?
        • Yes, but only if you root your device. With a rooted phone you could delete unused system apps, but it gets a bit complicated. Deleting some apps may cause problems with subsequent OS updates, so you should be careful. See this list for Android system apps can be safely removed. Instead of deleting, you can “freeze” unused system apps using Titanium Backup. Freezing an app will remove it from the app drawer and memory and will make sure it is never launched, but it will not free any space in the internal phone storage.
      • Q: Can I move system apps such as Gmail, Google Maps to SD card on a rooted phone?
        • A: Thanks to Dominique Tardif for this tip: “You have first to uninstall any updates to the system apps in question. Second, using a rooted file manager, delete the original apk from /system/app (android keeps the system app apart from the updates, the latter being at /data/apps). Once this is done, reboot and reinstall the app from the market. It will be installed as a user app and as such will be movable to the sd card. As an example, my gmail, facebook, maps etc. are all on my sd card now.”
      • Q: Can I move system apps to SD card if I’m using a custom ROM?
        • A: Yes. The most popular “aftermarket” Android firmware CyanogenMod puts the absolute minimum of the apps in the system folder. CyanogenMod 7 also by default enables the hack described in this post to allow most apps to be movable to SD card. As a result, many Android apps such as Maps, Youtube, Gmail can be moved to SD card on CyanogenMod 7, while they are unmovable to SD in the stock firmware. Note that to install CyanogenMod the phone doesn’t need to be rooted, but bootloader needs to be unlocked.

No comments:

Post a Comment